The front engine dragster is a type of racing car purpose built for drag racing. Commonly known as a "rail", "digger", or "slingshot", it is now considered obsolete, and is used only in nostalgia drag racing. Models ranged from 97 to 225 in (2,464 to 5,715 mm) in wheelbase.
Video Front engine dragster
History
The front engine dragster came about due to engines initially being located in the car's frame in front of the driver. They did not use (and current dragsters still do not use) any form of suspension. Because of this, these types of vehicles were prone to becoming unstable at speed. This is due to their making 2,000-3,000 hp (1,491-2,237 kW), plus having poor tire technology, short wheelbases, and very light weight. (This was demonstrated to extremes in the Fuel Altereds.) The driver sits angled backward, over the top of the differential in a cockpit situated between the two rear tires, a design originating with Mickey Thompson in 1954, as a way of improving traction. This position led to many drivers being maimed when catastrophic clutch failures occurred.
Introduced with the start of organized drag racing, they were limited by the availability of traction from their rear tires or "slicks". A number of dragsters with four rear drive wheels were attempted as well, including cars by Art Chrisman (along with his brother, Lloyd, and partner Frank Cannon), Bill Coburn, and Eddie Hill. (Coburn and the Chrisman brothers used twin engines, also.)
The slingshot produced a number of fatal wrecks in the 1960s, including Mike Sorokin's and John Mulligan's (months after suffering severe burns in a fire at the Nationals in 1969). Clutches, bellhousings, blowers, and engines exploded, with e.t.s hitting 6.43 seconds by the end of 1969, a pass recorded by Mulligan to qualify #1 at the Nationals. Other accidents included a flip (what today would be called "blowover") by Jim Nicoll at the 1970 Nationals after a clutch failure.
The slingshot's advantages, putting weight over the rear tires, now served to cause the front end to lift, as tire technology improved, to the point ballast, sometimes hundreds of pounds worth, had to be added over the front axle, while others, like Ronnie Scrima (on his Scrimaliner) and Tony Nancy, would mount a winglet.
The drawbacks led to several attempts at rear-engined cars, but the rail was only supplanted by the rear-engined type (which is now standard) when Don Garlits introduced Swamp Rat XIV in 1971. He designed the car while in hospital, having suffered from severe injuries caused by an exploding clutch.
Maps Front engine dragster
References
Source of the article : Wikipedia
0 Comments