The term boot refers to a family of instruments of torture and interrogation that are designed differently to cause injuries that destroy legs and/or feet. Booting has taken many forms in various places and times. Common varieties include Spanish boot (sometimes referred to as "scarpines") and Malay boot . One type is made of four pieces of narrow wooden board nailed together. The boards were measured to fit the victim's feet. After the feet are closed, the slices will be hammered between the boards, creating pressure. The pressure will increase until the victim confesses or loses consciousness. New variants include iron vises - sometimes armed with nails - squeezed feet and metal frames used red-hot.
Video Boot (torture)
boot Spanyol
Spanish boot is an iron casing for legs and feet. Sliced ​​wood or iron hammered between the casing and the meat of the victim. A similar device, commonly referred to as shin crusher , squeezes the calf between two curved iron plates, studded with nails, teeth, and knobs, to break the tibia and fibula.
The primitive pioneer of the archetype can be found dating back as far as a thousand years. The first Scottish effort, also referred to as buskin, made use of raw cork clothing in the form of boots soaked in water, pulled on the feet and lower legs, and tied with rope. The device is slowly heated over a soft fire, drastically rehearsing the raw skin and squeezing the leg until it is dislocated, although there will not be sufficient pressure to destroy the leg bones. The more progressive variant, found in the British Isles and France, consists of three straight wooden planks scattered around and between the legs and tied in place by a rope. Wedges hammered between boards and legs to dislocate and destroy bones. A prototype from Autun, France, consists of high boots of porous and porous skin that are pulled over the legs and feet. Boiling water is poured onto the boots, eventually moistening the skin and eating meat from trapped limbs. Lastly, too large iron or copper boots (often soldered on the floor) receive bare feet of prisoners when he lies helplessly tied up and clogged in a chair. The boots are slowly filled with boiling water or oil, or even liquid tin, to consume legs and feet. One variant - applied in Ireland to martyrs Dermot O'Hurley - consists of light metal boots filled with cold water and heated with feet in the fire until the water boils aggressively.
Maps Boot (torture)
Press leg
A similar tool, leg press or foot screw , consists of a pair of horizontal iron plates that are gradually fastened around bare feet with a crank mechanism to destroy bones. Although it is standard enough to coat the bottom plate with ribs to prevent the foot from gripping the instrument due to being a sweatier, a cruel variant of this device - commonly found in Nuremberg, Germany - lined on plates with hundreds of sharp spikes. A version of Venice, sometimes called a foot screw or toe solver, connects the cranking mechanism to the drill that slowly cuts the foot by wetting the hole through the center of the foot as the press tightens. The instrument has sufficient strength and cruelty to destroy the smallest leg bones.
Medieval shoe is built according to various architecture. One commonly-funded boot consists of a pair of upright parallel boards that split the toes. Rotating the screw presses the toes between the boards, causing lateral pressure on the metatarsal head and causing the pain. This is a boot type commonly associated with Esmeralda torture in Victor Hugo Hunchback of Notre-Dame . Cruelty of torture can be increased by the distance of the toes apart with stiff wooden spikes. Various instrument extensions are designed to destroy the ankle, calf, or knee next to its main target, the back of the foot. The toes often protrude from the front of the boot, facilitating the suffering of additional torture, such as tearing the nails forcibly from the toes with a hot iron clamp.
Source of the article : Wikipedia
0 Comments